Apex Shed - 3ft x 5ft - Windowless - Single Door

  1. Home
  2. 3ft Sheds
  3. Apex Shed - 3ft x 5ft - Windowless - Single Door

Premium Shed

Availability:
In stock

Apex Shed - 3ft x 5ft - Windowless - Single Door

£478.00 £574.00
Tax included.

This 3ft x 5ft Apex Shed offers a sleek, windowless design with a central door. Crafted from pressure-treated, tongue-and-groove timber, it's built for durability. Finished with stylish epoxy black door hardware.

Width x Depth:

3ft x 5ft

Pressure Treated For superior durability
12mm Tongue & Groove For a more solid shed.
Quality Roof Construction Tongue & Grooved.
Quality Floor Construction Tongue & Grooved.
Strong Hinges & Lock For enhanced security.
All fixings & Fastenings Included as standard.
Need a different size?

Optional Extras

15 Year Anti-Rot & Fungal Guarantee read more
Free UK Mainland delivery on all sheds

We currently offer free UK mainland delivery on all shed orders.

We aim to deliver all orders within 5-10 working days of order acceptance.

Our team will contact you after the order has been placed to agree the delivery day.

Due to the size of the items on sale we are only able to offer delivery of products to customers on the UK mainland. We may not be able to deliver to some offshore locations and there may be an additional delivery charge for some locations eg Northern Ireland, the Channel Islands, Isle of Man, Orkney, Shetland and Scottish Islands. We cannot usually deliver to BFPO addresses, or the Republic of Ireland.

Technical Information

Full technical information is available in our FAQs, however, some useful information is included below.

  • Each shed is manufactured from Pressure Treated Timber
  • The shed throughout is manufactured from Tongued and Grooved Material (including the roof and floor) No Sheet material is used
  • The thickness of the tongued and grooved boards is a minimum of 12mm finished size
  • The pressure treated framework is a mixture of 44mm x 44mm and 44mm x 27mm, finished size
  • Standard door height is 5ft 10 ½” (1.55m)
  • Standard door width is 2ft 6” (0.79m)
  • Standard double door width 4ft (1.2m), 2ft (0.6m) each door
  • Apex shed eaves height is approximately 5ft 7” (1.73m)
  • Apex shed ridge height is approximately 6ft 5” (1.98m)
  • Pent shed eaves height is approximately 6ft (1.82m)
  • Pent shed ridge height is approximately 6ft 7” (2.04m)
  • The shed floor has runners’ underneath which are approximately 1ft (300mm) apart
  • Each order includes the felt, fixings and windows (if applicable)
Promo Image

15 Year Anti-Rot & Fungal Guarantee

Built to last, our Apex Shed is backed by a 15-year anti-rot and anti-fungal guarantee. We are committed to sustainability, with all timber responsibly sourced to contain at least 70% wood from well-managed forests, fully compliant with Forest Stewardship Council standards.

Invest in quality, durability, and peace of mind with our Apex Shed - designed to stand the test of time.

Fitting Instructions

It is recommended that you read these instructions to assist in the assembly of your shed.

As timber is a natural material and it will expand and shrink depending on the humidity levels surrounding the area. During hot weather shrinkage may occur and result in warping or splitting of the wood, although this will largely reverse once cooler and wetter weather returns. Please note that this will not have any detrimental effect on the structural quality of the shed.

Tools required for this project, spirit level, hammer, power screwdriver, silicone gun, hand saw, stanley knife, step ladder. Please note that the instructions are based on two people completing the work.

1. A flat level base must be prepared for your building which must be the same size as the shed or bigger, recommended materials would be flag stones or concrete

2. Check your base is level using a spirit level in several positions, once you are happy position the floor

3. You might wish to consider using bearers set equally on the prepared base, use the spirit level on each bearer at right angles to make sure they are all exactly the same height and they must run the opposite way to the floor of the shed

4. Position one side and the plain gable together on the edge of the floor, fasten together on the inside using the appropriate size screws (this will depend on the framework of your shed)

5. Position the remaining sides and repeat instruction number 4.

6. Once this is complete square the sides to the shed base, using at least 50mm screws and ensure that the screws are positioned so that they screw into the floor framing.

7. Place the first roof panel to rest on the plain gable and door gable and repeat with the other roof section. Level and screw the two ridge frames together from the inside, the frame will be closed up internally. Externally there will be a small ‘V’ which will be covered once the felt is in place.

8. Cut the felt to size leaving 50mm overhang off of the roof

9. Place a length of felt on the roof, sand to the top. Equal overhang length at each side and sufficient to cover the frame at the lower end of the roof panel, use the clout nails to fasten the top edge of the felt.

10. Fasten the lower edge of the felt using the clout nails and repeat on the other side of the roof.

11. With equal overlaps position and nail the third length of felt

12. Fold over the end of the roof and the use the fascia to cover, nail through the fascia into the framing

13. Fix the two diamond caps over the join of the fascias on each gable end

14. Position and nail the strips at each corner

15. If you have windows in your shed remove the protective film from the polycarbonate pane and place in position

16. Using small nails (25mm) fit the beading over the pane and repeat for each window

17. If you have more than one window you will have a centre strip, again using the small nails (25mm) secure the centre strip, make sure you do not hit the panes

18. Seal around the edges of your windows with a bead of silicone